HOME

Definition
  of Movement

Anchoring
  and Guiding

Cycle Life

Matchless 
Bellows 
Expansion joint

Matchless 
Bellows E J

Universal Tied EJ

Externally
  Pressurized
  Bellows
  Expansion 
Joints

Series 5000
  BPC Pump
  Connectors

Matchless
 Non Standard
  Dual Unit

Pressure
  Balanced Unit

Liners and 
Covers

Tube Flex
  Engine Exhaust 
Expansion Joint

U-100 
Expansion Joints

High Pressure
  Expansion 
Compensators

Inter-flex 
Interlocked 
Flexible Metal 
Tubing
Standard
  Warranty

 

 
 

Florida
3901 NE 12th Avenue,  
Pompano Beach FL 33064
  In FL 954-943-5002   Fax: 954-946-3583

ISO 9001: 2000 CERTIFIED

1-800-327-1286
E-mail: sales@unaflex.com

South Carolina
1715 Hwy 29 S. / P.O. BOX 1229
 Anderson, South Carolina 29622
Phone. 864-222-1710  Fax: 864-222-1306

ISO 9001: 2000 Certification under way

Metal Expansion Joints

 

"MATCHLESS" NON-STANDARD DUAL UNIT

 

 

 

Dual Expansion Joints are often used where axial movement is grater than can be absorbed by a single Expansion Joint. The dual assembly consists of two single Expansion Joints connected by an interconnecting pipe nipple. In many cases, this interconnecting nipple has an integral anchor base. The base is designed to withstand the forces required to move either expansion joins. when no anchor base is provided, the interconnecting nipple must be anchored with standard pipe anchors. 

Dual Expansion Joints are employed where large amounts of movement in any combination are required. i.e. axial, lateral deflection and angular rotation which can not be absorbed by a single expansion joint. In these types of application, the interconnecting nipple is not anchored by the remaining system must be properly anchored and guided.

 

 

PRESSURE BALLANCED UNIT


SPECIAL CONSTRUCTION TYPES:

  • TIED
  • UNIVERSAL
  • PEDESTAL
  • HINGED
  • GIMBAL
  • EXTERNALLY GUIDED

Liners and Covers

LINERS AND COVER

Liners and Covers are used to provide additional protection to the thin wall bellows element of the expansion joint. Dents or other damage to the bellows will materially affect the performance of an expansion joint and a cover should be used where conditions warrant this additional protection.

Liners or internal sleeves are used to minimize contact with the medium, smooth flow , control erosion and eliminate resonance where flow velocities are high. 

FLEXIBILITY
Unaflex offers various liner designs. Drop in liners are avvailable which allow easy maintenance and replacement. Flared liners welded directly to the expansion joint are designed to allow proper clearance for expansion joint motion.

   
 

 

 

Home Page  Inquiries  Products    Tour Our Facilities     Expansion Joints    Rubber Expansion Joints    Metal Expansion Joints  Fabric Expansion Joints    PTFE   Rubber Hose       Marine Hose     Metal Hose   Metal Braided Hose    Custom Hose

South Carolina
1715 Hwy 29 S./   P.O. Box 1229
Anderson S.C. 29622

1-800-327-1286
E-mail: sales@unaflex.com
Fax: 864-222-1306

Florida
3901 NE 12 Ave, Pompano Bch FL 33064
In FL 954-943-5002  FAX: 954-940-3583